Best for
- Heavy mowing, cutting and baling
- Frequent loader and backhoe work
- Commercial or municipal fleets
- Operators who want the highest hitch rating in the group
Massey Ferguson 2M.60
Massey Ferguson 2M.60: turbo 60.3 hp Iseki 2.43 L diesel, 47 hp PTO, 1,700 kg lift on the shuttle model.
MODEL2M.60
DRIVE4WD
WEIGHT1,945 kg ROPS / 2,120 kg cab
MARKETUnited States / North American market; 2025 model year; 2M Series
Engine power
60.3 HP
60.3 hp (45.0 kW) at 2,600 rpm
PTO output
47 HP
47.0 hp mechanical / 44.6 hp HST
Rear lift
1,700 kg
Mechanical 1,700 kg / HST 1,580 kg at lift points; 1,500 kg / 1,400 kg at 610 mm
Transmission
3-range Servo-HST or 12x12 power shuttle
Electronically controlled Servo-HST; power shuttle with electronic shuttle lever
Tractor overview
At 60.3 hp (45.0 kW), the 2M.60 is the strongest tractor in this Massey Ferguson group. The turbocharged 2.43 L Iseki four-cylinder sends 47.0 hp to the PTO on the mechanical shuttle and 44.6 hp on HST. Only on the shuttle does the Category I and II hitch reach 1,700 kg at the lift points; HST models lift 1,580 kg. That choice also changes length (3,460 mm against 3,360 mm) and ground clearance (295 mm against 355 mm). Ground-level fueling, an air-suspension seat and Classic or Deluxe cabs complete the package, and a higher 2M.65 sits above it in the range.
Who this tractor suits
Not ideal for
- Small properties where 60 hp is excessive
- Buyers on a tight budget
- Anyone expecting the same dimensions across transmissions
Practical specification guide
What the headline specifications mean during real tractor work.
Peak power
60.3 hp (45.0 kW) at 2,600 rpm, with EGR, DOC and DPF.
PTO capability
47.0 hp mechanical, 44.6 hp HST at 540 rpm, with electronic SoftStart modulation.
Hitch by transmission
Mechanical: 1,700 kg at the points and 1,500 kg at 610 mm. HST: 1,580 kg and 1,400 kg.
Dimensions
Length 3,460 mm (shuttle) or 3,360 mm (HST); width 1,810 mm; height 2,620 mm with ROPS or 2,370 mm with cab.
Weights
1,945 kg ROPS version, 2,120 kg cab version; clearance 295 mm shuttle or 355 mm HST.
Configuration & variant guide
Options and market differences that can change how this tractor is equipped or used.
| Option | Available setup | What it changes |
|---|---|---|
| Transmission | 3-range Servo-HST or 12x12 power shuttle | Alters hitch capacity, length and clearance, as well as PTO power. |
| Cab | Classic or Deluxe cab | Heat, A/C and noise insulation; adds about 175 kg and lowers height by 250 mm. |
| Tires | One US dealer build lists 10-16.5 front and 17.5-24 rear industrial tires | Industrial tread suits loader and hard-surface work; ask about ag alternatives. |
| Loader and backhoe | FL2814 loader; CB85 backhoe | Matched to the 2M.50 and 2M.60. |
| Remote valves | Factory-installed rear valves | A dealer example shows one set fitted. |
CHECKPOINT 06
Strengths and considerations
What stands out
- 60.3 hp from 2.43 L
- 1,700 kg hitch on the shuttle model
- Choice of Classic or Deluxe cab
- Strong loader and backhoe pairing
Check before buying
- Dimensions and lift vary by transmission
- Highest price in this group
- Heavy at 1,945 to 2,120 kg
- Premium electronics add complexity
CHECKPOINT 07
ID
EN
SP
PT
HY
SP
TR
TY
EL
ST
OP
IM
DM
SP
CN
Full specifications
55 data points across 15 categories.
ID
General Identification
8 fields
⌄
- Brand
- Massey Ferguson
- Model Name
- 2M.60
- Model Year
- 2025 -
- Series
- 2M Series
- Configuration
- Folding-ROPS platform or Classic/Deluxe cab; Servo-HST or power shuttle
- Tractor Class
- Compact Utility Tractor
- Drive Configuration
- 4WD
- Successor/Predecessor Model
- Replaces MF 2860M (2020-2024)
EN
Engine
9 fields
⌄
- Engine Manufacturer
- Iseki
- Engine Type
- Liquid-cooled, turbocharged diesel
- Number of Cylinders
- 4
- Bore × Stroke
- 87 × 102 mm
- Engine Displacement
- 2.43 L (148.6 cu in)
- Aspiration
- Turbocharged
- Rated Engine Speed
- 2,600 rpm
- Maximum Engine Power
- 60.3 hp (45.0 kW) at 2,600 rpm
- Emission Standard
- EGR, DOC and DPF
SP
Power Output
2 fields
⌄
- Engine Gross Power
- 60.3 hp (45.0 kW)
- PTO Power
- 47.0 hp mechanical / 44.6 hp HST
PT
PTO (Power Take-Off)
4 fields
⌄
- PTO Type
- Independent rear PTO
- PTO Engagement
- Electronic SoftStart modulation
- PTO Speed
- 540 rpm
- PTO Shaft
- 1-3/8 in
HY
Hydraulic System
6 fields
⌄
- Hydraulic Type
- Open center
- Hydraulic Pump
- Two gear-type pumps; implement flow 48.0 L/min mechanical, 47.8 L/min HST; steering 26.7 L/min
- Lifting Capacity
- Mechanical 1,700 kg / HST 1,580 kg at lift points; 1,500 kg / 1,400 kg at 610 mm
- 3-Point Hitch
- Yes
- Hitch Category
- Category 1 and 2
- Auxiliary Valve
- Factory-installed rear remote valves available
SP
Fuel, Fluids & Capacities
1 field
⌄
- Fuel Tank
- 53 L (14 gal)
TR
Transmission & Drivetrain
5 fields
⌄
- Clutch Type
- Hydrostatic: no clutch pedal; power shuttle: electronic shuttle lever
- Transmission Type
- 3-range Servo-HST or 12x12 power shuttle
- Gearbox Configuration
- Electronically controlled Servo-HST; power shuttle with electronic shuttle lever
- Forward Gears
- 12 (power shuttle) / infinite within 3 ranges (HST)
- Reverse Gears
- 12 (power shuttle) / infinite within 3 ranges (HST)
TY
Tyres & Axle Data
3 fields
⌄
- Tyre Type
- Industrial (one dealer-listed build)
- Front Tyres
- 10-16.5 (dealer-listed build)
- Rear Tyres
- 17.5-24 (dealer-listed build)
EL
Electrical & Electronics
2 fields
⌄
- Electrical System
- 12 V, negative ground
- Starter Motor
- Electric
ST
Steering System
1 field
⌄
- Steering Type
- Hydraulic power steering
OP
Operator Environment
4 fields
⌄
- Seat
- Wide, tall comfort seat
- Suspension Seat
- Upgraded air-suspension seat
- ROPS
- Two-post folding ROPS (fits beneath a 7-ft door), or Classic or Deluxe cab
- Control Layout
- Side-by-side pedals; joystick controls; electronic shuttle lever on power shuttle
IM
Implement Compatibility Matrix
3 fields
⌄
- Front Loader Compatible
- Front Loader Lift Capacity (kg)1,170 kg at pivot pin / 850 kg at 19.5 in forward (FL2814)
- Backhoe Attachment Compatible
DM
Dimensions & Weight
5 fields
⌄
- Overall Length
- 3,460 mm mechanical / 3,360 mm HST
- Overall Height
- 2,620 mm ROPS / 2,370 mm cab
- Overall Width
- 1,810 mm
- Minimum Ground Clearance
- 295 mm mechanical / 355 mm HST
- Unladen Weight
- 1,945 kg ROPS / 2,120 kg cab
SP
Ownership & Cost
1 field
⌄
- Availability / Market
- United States / North American market; 2025 model year
CN
Comfort & Noise
1 field
⌄
- Air Conditioning
- Optional
No specifications match your search.
CHECKPOINT 08
Sources and verification
Last manually verifiedOctober 3, 2026
Market / variantUnited States / North American market; 2025 model year; 2M Series
Accuracy note: Massey Ferguson's 2M Series specification sheet was used: loader FL2814, backhoe CB85, mechanical length 3,460 mm, and weights of 1,945 and 2,120 kg. The tire reference comes from one US dealer's deluxe-cab listing and does not describe every unit. Attributes that no source publishes are left blank; no missing specification was invented.
RELATED
You may also compare
Massey Ferguson 2M.50
- Engine
- 48.8 hp turbo, 4-cyl, 2.43 L
- PTO
- 36.2-38.1 hp, 540 rpm
- Hydraulics
- 47.8 L/min, 1,580 kg lift
Massey Ferguson 2E.60
- Engine
- 57.3 hp turbo, 4-cyl, 2.43 L
- PTO
- 45.3-48 hp, 540 rpm
- Hydraulics
- 47.7 L/min, 1,199 kg lift
Massey Ferguson 1E.25
- Engine
- 24 hp, 3-cyl, 1.49 L
- PTO
- 19.2-20.4 hp, 540 rpm
- Hydraulics
- 27.6 L/min, 1,000 kg lift
New Holland T6.155
- Engine
- 125 HP Rated / 155 HP EPM
- PTO
- 540/540E/1000 RPM
- Hydraulics
- 86–150 L/min / 7,864 kg